Home Forums Bike Fitting Di2 mishmash to a Santa Cruz Stigmata

Tagged: ,

This topic contains 1 reply, has 2 voices, and was last updated by  johnnystorm 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #23954


    I’ve had it with my CX-1 shifting, for whatever reason be it the cable routing or the spring of the Force-1 deraileur my shifting down to the bottom ring is very unreliable.

    So I was thinking of going a bit of a mish mash with TRP Hylex Brakes and the Shimano Di2 Climbing buttons, on the side which TRP do a kit for.

    But the question is, what else do I need? I’d want to have a XT deraileur and run 1x.

    So I just need the battery, the junction box on the stem, the climbing kit and the deraileur?

    I’ve seen people running Di2 on the Stigmata so know it can be done.

    Any advice?



    That’s what Pinnacle do for the Arkose LTD. Perhaps pop into Evans and ask a cheeky question or two there. 🙂

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.